 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| sa5v0(c)a - sa170(c)a sa5v0(c)a - sa170(c)a, rev. d transient voltage suppressors sa5v0(c)a - sa170(c)a 500 watt transient voltage suppressors absolute maximum ratings* t a = 25c unless otherwise noted ? 2002 fairchild semiconductor corporation symbol parameter value units p ppm peak pulse power dissipation on 10/1000 s waveform 500 w i ppm peak pulse current on 10/1000 s waveform see table a p d power dissipation .375 " lead length @ t a = 75 c 1.0 w i fsm non-repetitive peak forward surge current superimposed on rated load (jedec method) (note 1) 70 a t stg storage temperature range -65 to +175 c t j operating junction temperature + 175 c features ? glass passivated junction. ? 500w peak pulse power capability on 10/1000 s waveform. ? excellent clamping capability. ? low incremental surge resistance. ? fast response time; typically less than 1.0 ps from 0 volts to bv for unidirectional and 5.0 ns for bidirectional. ? typical i r less than 1.0 a above 10v. devices for bipolar applications - bidirectional types use ca suffix. - electrical characteristics apply in both directio ns. do-15 color band denotes cathode on unidirectional devices only. no color band on bidirectional devices. * these ratings are limiting values above which the s erviceability of any semiconductor device may be im paired. note 1: measured on 8.3 ms single half-sine wave or equiva lent square wave; duty cycle = 4 pulses per minute maximum.
sa5v 0(c)a - sa170(c)a sa5v0(c)a - sa170(c)a, rev. d transient voltage suppressors (continued) electrical characteristics t a = 25c unless otherwise noted * for bidirectional parts with v rwm <10v, the i r max limit is doubled. uni-directional bi-directional (c) device reverse stand-off voltage v rwm (v) breakdown voltage v br (v) test current i t (ma) clamping voltage @i ppm v c (v) peak pulse current i ppm (a) reverse leakage v rwm i r (ua)* min max sa5v0(c)a 5.0 6.40 7.00 10 9.2 54.3 600 sa6v0(c)a 6.0 6.67 7.37 10 10.3 48.5 600 sa6v5(c)a 6.5 7.22 7.98 10 11.2 44.7 400 sa7v0(c)a 7.0 7.78 8.60 10 12.0 41.7 150 sa7v5(c)a 7.5 8.33 9.21 1.0 12.9 38.8 50 sa8v0(c)a 8.0 8.89 9.83 1.0 13.6 36.7 25 sa8v5(c)a 8.5 9.44 10.4 1.0 14.4 34.7 10 sa9v0(c)a 9.0 10.0 11.1 1.0 15.4 32.5 5 sa10(c)a 10 11.1 12.3 1.0 17.0 29.4 1 sa11(c)a 11 12.2 13.5 1.0 18.2 27.4 1 sa12(c)a 12 13.3 14.7 1.0 19.9 25.1 1 sa13(c)a 13 14.4 15.9 1.0 21.5 23.2 1 sa14(c)a 14 15.6 17.2 1.0 23.2 21.5 1 sa15(c)a 15 16.7 18.5 1.0 24.4 20.6 1 sa16(c)a 16 17.8 19.7 1.0 26.0 19.2 1 sa17(c)a 17 18.9 20.9 1.0 27.6 18.1 1 sa18(c)a 18 20.0 22.1 1.0 29.2 17.2 1 sa20(c)a 20 22.2 24.5 1.0 32.4 15.4 1 sa22(c)a 22 24.4 26.9 1.0 35.5 14.1 1 sa24(c)a 24 26.7 29.5 1.0 38.9 12.8 1 sa26(c)a 26 28.9 31.9 1.0 42.1 11.9 1 sa28(c)a 28 31.1 34.4 1.0 45.4 11.0 1 sa30(c)a 30 33.3 36.8 1.0 48.4 10.3 1 sa33(c)a 33 36.7 40.6 1.0 53.3 9.4 1 sa36(c)a 36 40.0 44.2 1.0 58.1 8.6 1 sa40(c)a 40 44.4 49.1 1.0 64.5 7.8 1 sa43(c)a 43 47.8 52.8 1.0 69.4 7.2 1 sa45(c)a 45 50.0 55.3 1.0 72.7 6.9 1 sa48(c)a 48 53.3 58.9 1.0 77.4 6.5 1 sa51(c)a 51 56.7 62.7 1.0 82.4 6.1 1 sa54(c)a 54 60.0 66.3 1.0 87.1 5.7 1 sa58(c)a 58 64.4 71.2 1.0 93.6 5.3 1 sa60(c)a 60 66.7 73.7 1.0 96.8 5.2 1 sa64(c)a 64 71.1 78.6 1.0 103.0 4.9 1 sa70(c)a 70 77.8 86.0 1.0 113.0 4.4 1 sa75(c)a 75 83.3 92.1 1.0 121.0 4.1 1 sa78(c)a 78 86.7 95.8 1.0 126.0 4.0 1 sa85(c)a 85 94.4 104.0 1.0 137.0 3.6 1 sa90(c)a 90 100.0 111.0 1.0 146.0 3.4 1 sa100(c)a 100 111.0 123.0 1.0 162.0 3.1 1 sa110(c)a 110 122.0 135.0 1.0 177.0 2.8 1 sa120(c)a 120 133.0 147.0 1.0 193.0 2.7 1 sa130(c)a 130 144.0 159.0 1.0 209.0 2.4 1 sa150(c)a 150 167.0 185.0 1.0 243.0 2.1 1 sa160(c)a 160 178.0 197.0 1.0 259.0 1.9 1 sa170(c)a 170 189.0 209.0 1.0 275.0 1.8 1 sa5v0(c)a - sa170(c)a sa5v0(c)a - sa170(c)a, rev. d transient voltage suppressors (continued) typical characteristics 0 25 50 75 100 125 150 175 200 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 lead temperature [oc] power dissipation [w] 0 25 50 75 100 125 150 175 200 0 25 50 75 100 ambient temperature [oc] pulse power [%] 1 2 5 10 20 50 100 10 20 50 100 number of cycles at 60hz peak forward surge current, i fsm [a] t = t max 8.3ms single half sine-wave jedec method a a 0 1 2 3 4 0 50 100 150 time [ms] peak pulse current [%] t = 25 c o a pulse width (td) is defined as the point where the peak current decays to 50% of ipp 10/1000 ? sec waveform as defined by r.e.a. tf = 10 ? sec e-kt peak value ippm half value-ipp 2 td 0.0001 0.001 0.01 0.1 1 10 0.1 1 10 100 pulse width [ms] pulse power [kw] t = 25 c o a 1 5 10 50 100 200 10 20 50 100 200 500 1000 2000 4000 6000 reverse voltage, v r [v] total capacitance, c t [pf] t = 25 c o a f = 1.0 mhz visg = 50m vp-p measured at zero bias measured at stand-off voltage (v mw) figure 1. peak pulse power rating curve figure 2. pulse derating curve figure 3. pulse waveform figure 4. total capacitance - unidirectional figure 5. steady state power derating curve figure 6. non-repetitive surge current !"#$ %"& '(% & % )'"% &' ! %*$%('( (! '&$$% "'+ '% ,'*- %& ''.$ '- '( $$ %+ !% !"'* %("& % % $% %( / 0 ! 11 2 2 34 5 1 23 45 11 3 45 1 1 1 2 1 3 21 6 2 7 1 21 11 2 1 21 11 23 2 $ 2 ( ( % 1 1 1 1 2 2 1 2 3 11 2 1 2 1 1 2 1 1 1 2 1 2 " $ $ ( $ ! " ! #$ ! $ % $& ' ( ) !! *! * + ,$ " ! % - $ " ./ " .0 " .1 2 2 , " $! $ 8$%-' 3% 3 $ 45 |
Price & Availability of SA11CA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |